B-KING Adjustable Kickstand & Threaded Style Lowering Links Combo Kit

Product Overview

Be the first to review this product

B-KING Adjustable Kickstand & Threaded Style Lowering Links Combo Kit
Product Code: K-22 100 / 2LL-210

Availability: In stock

Regular Price: $349.00

Special Price $264.00



Adjustable Kickstand

Our B-KING Adjustable Kickstand Side Stand BILLET lowering kickstands use stainless steel hardware and are CNC machined from SOLID ALUMINUM. They are capable of stock length to 3 inches shorter and are the strongest, best looking on the market today! There are a number of adjustments to choose from, simply loosen the lock screws and set it to your desired ride height. Don't use a cheap kickstand and take the chance of your bike laying on its side!

We've designed the foot area of the kickstand with a radius that allows the user to fine-tune their desired lean angle. This product is a great companion for our lowering kits.

Keep in mind if your motorcycle is lowered, the frame will be closer to the ground. The kickstand is mounted to the frame and will need to be shortened to retain the lean angle the bike needs to keep from tipping over.

This is a direct bolt-on item. Simply remove your stock kickstand, replace with ours, adjust and ride! Uses the stock kickstand spring and safety switch.

Threaded Style Lowering Links

Included are a pair of Soupys Double Style Lowering Links for the Suzuki B-King. Also included are usage instructions.

When searching for B-King ride height lowering or raising links please take a look at your B-King and note that there is an anti-rotate detail on one of the stock links. OUR LINKS UTILIZE THIS SAME DETAIL. Be careful and do not use a set of links that does not have this detail. The link mounting bolts could possibly loosen without this anti-rotate detail!

Our B-King turnbuckle style lowering links are infinitely adjustable between stock height and a 4 inch drop. No need to remove bolts and disassemble the rear suspension everytime you raise or lower your bike! Just loosen the nuts and rotate the center portion of each link the same amount. You do not have to remove bolts and find a way to hold the bike up while you are doing it! The hex body is zinc plated steel or stainless steel, NOT aluminum. The ends have a 1/2" thread and are black oxided steel, NOT aluminum. Aluminum threads DO NOT last and are dangerous!

If you need adjustable links that lower the bike more than 4 inches, we can do that. If you need adjustable links that RAISE the bike, we can do that too.