Daytona 650 Adjustable Kickstand & Lowering Links Discount Combo Kit
Save more with this Discounted Combo Kit from Soupy's Performance.
Compatible with Daytona 650. Soupy’s Adjustable Kickstand Lowering Side Stands are CNC machined from solid aluminum and use stainless steel hardware. Adjustable from stock length to 3 inches shorter and the strongest and most stylish available. There are a number of different lengths to choose from. The foot has a radius that accommodates all different lean angles.
If your motorcycle is lowered, the frame is closer to the ground. The kickstand is mounted to the frame and needs to be shorter to retain the lean angle required to prevent the motorcycle from standing too upright or tipping over. This is a direct bolt-on item. Simply replace your stock kickstand with this, adjust to your desired length, apply thread locker and tighten screws. Designed for use with the factory kickstand spring and safety switch. Pictures are for reference only, you will receive the correct kickstand for your application. We also offer an oversize kickstand foot found here.
Lowering Link KIt-Threaded Style
Our Daytona 650 (All Years) turnbuckle style lowering link will adjust the rear of the bike infinitely between -1 and a 4 inch drop (unless noted differently below). No need to remove the link from the bike...just loosen the nuts and rotate the center hex body. You do not have to remove bolts and find a way to hold the bike up while you are doing it! The body is silver zinc plated steel or stainless steel, NOT aluminum. The ends have a 1/2" thread and are zinc plated steel for strength and corrosion resistance. There are also 4 inserts that make up the difference in the diameter and length of the stock bearing setup. THIS IS A DIRECT BOLT-ON ITEM! The ball bearing is hardened steel with a Teflon race. Aluminum threads DO NOT last and are dangerous!
Daytona 650 (-1" to -4" ride height)