Soupy's Kawasaki Ninja 250 1st Generation (86-07) Full Lowering Kit (Front & Rear) & Kickstand - Save $15!
FITS 1986-2007 KAWASAKI NINJA 250 - SAVE $15 on combined shipping!
Included is 1 of our Ninja 250 Front Lowering Kits and a pair of our Ninja 250 Double Style Lowering Links with usage instructions.
This well priced kit will allow you to lower the front of your ninja 250 up to 1 inch, also included is a set of adjustable lowering links for the rear that are capable of anything up to a 4 inch drop.
Use these 1 inch tall spacers to move the handlebars closer to the rider and to provide top-of-the-fork clearance that is needed to slip the forks up in the triple clamps, which will lower the front of the bike. All cables and connections reach with no problem. Levers and reservoirs clear the windscreen with no problem.
Remove black plastic bolt covers, remove bolts, lift handlebars and install spacers with provided, longer bolts, reinstall plastic covers. To lower the front, simply adjust the forks up in the triple clamps. Included is: (2) aluminum spacers that are ready to be polished or painted and new installation hardware.
REAR LOWERING LINKS
No need to remove the links from the bike...just loosen the nuts and rotate the center portion of each link the same amount. You do not have to remove bolts and find a way to hold the bike up while you are doing it.1st generation (86-07) Ninja 250 turnbuckle style lowering links are infinitely adjustable between raised 1 1/2 inches and a 4 inch drop. 2nd generations (08 and up) are adjustable from stock height to a 4 inch drop.
Ninja 250 (1986 - 2007) Adjustable Kickstand
Adjustable Kickstand Side Stand BILLET lowering kickstands use stainless steel hardware and are CNC machined from SOLID ALUMINUM. They are capable of stock length to 3 inches shorter and are the strongest, best looking on the market today! There are a number of adjustments to choose from, simply loosen the lock screws and set it to your desired ride height. Don't use a cheap kickstand and take the chance of your bike laying on its side!
We've designed the foot area of the kickstand with a radius that allows the user to fine-tune their desired lean angle. This product is a great companion for our lowering kits.
Keep in mind if your motorcycle is lowered, the frame will be closer to the ground. The kickstand is mounted to the frame and will need to be shortened to retain the lean angle the bike needs to keep from tipping over.
This is a direct bolt-on item. Simply remove your stock kickstand, replace with ours, adjust and ride! Uses the stock kickstand spring and safety switch.