Soupy's Kawasaki Ninja 250 2nd Generation (2008-14) Full Lowering Kit (Front & Rear) - Save $10!
FITS (2008-2014) KAWASAKI NINJA 250 - SAVE $10 on combined shipping!
Included is 1 of our Ninja 250 Front Lowering Kits and a pair of our Ninja 250 Double Style Lowering Links with usage instructions.
This well priced kit will allow you to lower the front of your ninja 250 up to 1 inch, also included is a set of adjustable lowering links for the rear that are capable of stock height up to a 4 inch drop.
Use these 1 inch tall spacers to move the handlebars closer to the rider and to provide top-of-the-fork clearance that is needed to slip the forks up in the triple clamps, which will lower the front of the bike. All cables and connections reach with no problem. Levers and reservoirs clear the windscreen with no problem.
Remove black plastic bolt covers, remove bolts, lift handlebars and install spacers with provided, longer bolts, reinstall plastic covers. To lower the front, simply adjust the forks up in the triple clamps. Included is: (2) aluminum spacers that are ready to be polished or painted and new installation hardware.
REAR LOWERING LINKS
No need to remove the links from the bike...just loosen the nuts and rotate the center portion of each link the same amount. You do not have to remove bolts and find a way to hold the bike up while you are doing it. 1st generation (86-07) Ninja 250 turnbuckle style lowering links are infinitely adjustable between raised 1 1/2 inches and a 4 inch drop. 2nd generations (08 and up) are adjustable from stock height to a 4 inch drop.
Keep in mind that after the bike is lowered, the kickstand will need to be shortened as well.
Our Adjustable Kickstands Are Listed Here