Speed Triple (1997-2008) Fully Adjustable Kickstand / Lowering Link Combo Kit
Speed Triple (1997 - 2008) Fully Adjustable Kickstand
Our BILLET lowering kickstands use stainless steel hardware and are CNC machined from SOLID ALUMINIM. They are capable of stock length to 3 inches shorter and are the strongest, best looking on the market today! There are a number of adjustments to choose from, simply loosen the lock screws and set it to your desired ride height. Dont use a cheap kickstand and take the chance of your bike laying on its side!
We've designed the foot area of the kickstand with a radius that allows the user to fine-tune their desired lean angle. This product is a great companion for our lowering kits.
Keep in mind if your motorcycle is lowered, the frame will be closer to the ground. The kickstand is mounted to the frame and will need to be shortened to retain the lean angle the bike needs to keep from tipping over.
This is a direct bolt-on item. Simply remove your stock kickstand, replace with ours, adjust and ride! Uses the stock kickstand spring and safety switch.
Triumph Speed Triple Lowering Link (1997-2010) fully CNC machined from solid aluminum, this lowering link will lower the rear of the single-sided swingarm motorcycles 1 1/2 inches (38mm).
Bearings and seals are not included. Use the bearings and seals from your stock link or purchase and install new ones. If you would like to re-use your bearings and seals, we can install them in your new lowering link for an additional $30. Send us your stock link and we will return it with your order.
INSTALLATION IS SIMPLE-
- Remove stock link
- Install current or new bearings and seals into our lowering link
- Install our lowering link and enjoy your new ride height!