XSR700 All Years Adjustable Kickstand & Lowering Links Discount Combo Kit
Save more with this Discounted Combo Kit from Soupy's Performance. Compatible with all years XSR700.
Soupy’s Adjustable Kickstand Lowering Side Stands are CNC machined from solid aluminum and use stainless steel hardware. Adjustable from stock length to 3 inches shorter and the strongest and most stylish available. There are a number of different lengths to choose from. The foot has a radius that accommodates all different lean angles.
If your motorcycle is lowered, the frame is closer to the ground. The kickstand is mounted to the frame and needs to be shorter to retain the lean angle required to prevent the motorcycle from standing too upright or tipping over. This is a direct bolt-on item. Simply replace your stock kickstand with this, adjust to your desired length, apply thread locker and tighten screws. Designed for use with the factory kickstand spring and safety switch. Pictures are for reference only, you will receive the correct kickstand for your application. We also offer an oversize kickstand foot found here.
Adjustable Lowering Link:
This is a direct bolt-on item that replaces the factory rear suspension linkage. Included is Soupy’s Adjustable Lowering Link and usage instructions. If you need a custom ride height, please contact us.
This fully adjustable lowering link can transform the rear of the motorcycle to any height between lowered 1 inch (25 mm) and lowered 4 inches (100 mm). HOWEVER, TO LOWER THE MOTORCYCLE MORE THAN 1.5 INCHES WITH THIS LOWERING LINK, CLEARANCE MODIFICATIONS WILL NEED TO BE PERFORMED TO EITHER THE SHOCK PIVOT ARM OR THE MOTORCYCLE'S FRAME. This is perfect for anyone who needs just a little more of their feet touching the ground at intersections and on slopes, or for that "lowered stance" look. To change ride height, simply turn the center hex adjusters an equal amount. Made of steel, it uses large, ½ inch diameter threads and silver zinc coating for strength and corrosion resistance. The ball bearings are hardened steel with a Teflon race. We do not use aluminum threads.
To install: Remove weight from rear of motorcycle, remove factory link mounting bolts, remove stock link and replace with Soupy’s Lowering Link, reinstall bolts, adjust to desired ride height, ride!